- 53
- 534 642
Extreme Oil Obsession
Приєднався 14 сер 2010
AMSOIL BRIGGS & STRATTON 4T RACING OIL 110°c BRASS FRICTION TEST
Measurement of abrasion on brass roller lubricated with engine oil at 110°c using Timken method.
Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 110°c mediante metodo Timken.
Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 110°c mediante metodo Timken.
Переглядів: 4 887
Відео
STEEL SHIELD TECHNOLOGY RED FOX M13 GT RACING 10W50 110°c BRASS FRICTION TEST
Переглядів 1,7 тис.3 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 110°c using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 110°c mediante metodo Timken.
MOTORKOTE VS ENGINE SHIELD SUPER TEST
Переглядів 20 тис.4 роки тому
Super test: -Corrosion: visual evaluation of a copper coin immersed in 20g of oil for 2 hours at ~ 200 ° c according to the ASTM scale. -Friction: measurement of the size of the trace left on a brass roller with the Timken method with new and cooked oil. Super test: -Corrosione: valutazione visiva di una moneta di rame immersa in 20g di olio per 2 ore a ~200°c secondo la scala ASTM. -Frizione: ...
LIQUI MOLY MoS2 6% BRASS FRICTION TEST
Переглядів 23 тис.4 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
SINTOFLON PROTECTOR 6% BRASS FRICTION TEST
Переглядів 6 тис.4 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
BARDAHL XTC C60 10W50 BRASS FRICTION TEST
Переглядів 16 тис.4 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
MOTUL 7100 10W50 BRASS FRICTION TEST
Переглядів 44 тис.4 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
STEEL SHIELD TECHNOLOGY PHANTOM 5W40 USED OIL BRASS FRICTION TEST
Переглядів 1,1 тис.4 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
STEEL SHIELD TECHNOLOGY PHANTOM 5W40 BRASS FRICTION TEST
Переглядів 9144 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
STANDARD SYNT OIL 5W40 BRASS FRICTION TEST
Переглядів 2 тис.4 роки тому
Measurement of abrasion on brass roller lubricated with engine oil, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore, mediante metodo Timken.
IPONE STROKE 4 10W50 RACING BRASS FRICTION TEST
Переглядів 5 тис.4 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
SHELL ADVANCE ULTRA 15W50 BRASS FRICTION TEST
Переглядів 25 тис.4 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
STEEL SHIELD TECHNOLOGY SPIDER 5W30 BRASS FRICTION TEST
Переглядів 6404 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
TOTAL HI PERF 4T RACING 10W50 BRASS FRICTION TEST
Переглядів 14 тис.4 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
REPSOL MOTO 4T RACING 10W50 BRASS FRICTION TEST
Переглядів 11 тис.4 роки тому
Measurement of abrasion on brass roller lubricated with engine oil at 50°c, using Timken method. Misurazione dell' abrasione su rullo di ottone lubrificato con olio motore a 50°c, mediante metodo Timken.
It’s not should be green color?
V2 is not green
scale of little scar 😂 can you provide scientific data like in millimeters 😅
Ciao, non capisco cosa dimostra questo test. Vuoi dimostrare la scarsa qualità dell'olio silkolene o cosa. pubblica altri video testando altri oli e poi mettiamo a confronto.
Or just too cheap to buy Motorcoach
I don't know if you're trying to Bamboozled anybody but that is not Motorcoach motor code is purple
The Motorkote seemed real dark when using the syringe. It must be old or oxidized. I've been using Motorkote for 8 years. It is always the color of light corn syrup. Never as dark as regular oil. Never heard of engine guard. Looks like good stuff though.
So overall is xado a good buy in your opinion? Thanks for the video any feedback appreciated
Didn't shake the Motorkote, and sanded the spinning race which completely skews the test because it's a much higher micro finish after sanding...
Que resultado dio es bueno el aceite?
If you did a CLP, Cleaner Lubricant Prtotectant/Preservative performance test of various CLPs, people would flock over here.
Which is the best additive to engine oil to reduce friction?
Can you test rock oil synthesis
Another one??? Let's see...Engine Shield, DT550, Slick 50, Duralube, Prolong, Petron Plus, Archoil, Bestline, Atomoil, TriboTex, TurboMAx, HotShots, LiquiMoly, Seafoam, STP Ceramic, XADO, ZDDP, RISLONE, Motorkote...KITCHEN SINK!!!!!
Another one??? Let's see...DT550, Slick 50, Duralube, Prolong, Petron Plus, Archoil, Bestline, Atomoil, TriboTex, TurboMAx, HotShots, LiquiMoly, Seafoam, STP Ceramic, XADO, ZDDP, RISLONE, Motorkote, REV X, BG MOA.....KITCHEN SINK!!!!!...
I've done about 3 oil changes since using turbo maxx, I just ordered more for my next oil change!
Test SMT2?
Can you test the yamalube RS4GP????
ROYAL PURPLE ✨✨👑💜💯
Only motorkote .
Did you sand the Motorkote off before testing the pther product? Even brake cleaner doesn't remote motorkote ¡!!
Wow... been using this stuff for my motorbike and looked up this test to see if it was any good... very nice!
Its could used for gasoline car?
Would you ever recommend mixing additives?
Turbo v BestLine Nano
You used waaaaay too much WS². Dual-bonded film thickness is a maximum of 1 micron. Adding more than is necessary only serves to inhibit the function of the carrier fluid (in this case, the motor oil).
Feliz de haber descubierto este canal, un nuevo suscriptor le saluda y agracece sus videos desde España😊
How many miles of driving would the 5 minutes simulate?
from what oil were the tests next to the one from repsol here?
Both coins were placed with heads up ....i wonder how did the motorkote coin ends up with heads down after heating test ???
E buono??
Have you thought about trying graphene powder? (Not graphite) they say even 0.01% makes a big difference.
and what are the ingredients in these additives? Sulphur? Then you could try a mixture between engine and transmission oil. You could even try automatic transmission oil. In principle, it is about an oil film that must not break off, even under high pressure. Automatic transmission oil would be predestined for this. Just watch out for hydraulic tappets. But it would be worth a try.
flawed testing with camera cut aways
Would be nice to see an oil only test as well
I fell asleep 4 times. What happened
So which is better? I see ws2 falls out of suspension faster than hbn but do they both adhere to metal in a similar way. Even if ws2 has lower friction than hbn, if its in suspension for less time, does it make it overall better for engine oil? Also FYI Your title has a typo, missing the H on hexagonal
Does the motorkote require heat to bond to metal?
both of them.
Does it use chlorine as amzoil states. I was going to use M.K but now Im not due to this claim
The contents aren't public so I'm not sure how Amsoil would know. Amsoil is a great product. I just wonder if they are afraid of losing market share. I use Motorkote because it saves me a few bucks over using strictly Amsoil
@@dwightvoeks9970 It dont have to be public. They can do an oil analysis.
amsoil (a competator) is the only source for this. I have not seen a single independent analysis that shows this. The company claims it does not contain any chlorine.
@@dan16802 I have emailed them a couple times and asked them on their UA-cam channel with no response.
Probably a dumb question but what’s wrong with chlorine?
Please do NT Racing 5w-40, thay say can up to 10k milage..can it beat amsoil?
I’ll just use them both
The result? Its good oil?
Please test Motorex if you are still doing this!
Great work. No nonsense. No talk. Just results.
And the control, just oil?
its sad to see that you stopped uploading videos. i watched all the videos from your channel today. the difference between silkolene, shell and motul was very big. 3.1mm for motul and shell was 4.4 or 4.8mm...while shell is also a thicker oil...their 10w40 is way thicker, viscosity at 100 celcius is 15cm2 compared to the motul that is 13.2 mm2.....i was thinkinf of going with silkolene or shell and you helped me. i hope you are doing fine. you helped me stay with motul 7100 (10w40). i wanted to switch to silkolene and your results showed a difference between the same oils. i have a vstrom 650, V twin. i was looking for a low viscosity 10w40...i will just stick to motul 7100 or maybe even 5100 and not go full synthetic. maybe half synthetic is thicker and better for doing a lot of kilometers. 6000km. greetings from switzerland.
Please find a way to test RVS engine additive. I used the transmission additive, and it really worked great but no information on the engine. Thank you
Shell advance 15w- 50 One time bro I have to know
Non riesco a capire il test per ignoranza mia: é un buon olio?
Militec is bonds to metal via heat. It isn't meant to lube like oil. To properly test it you need to apply it to yourvtest billet, then heat said billet, then reapply. Same with the friction wheel. In any real-life application both surfaces would be treated via heat. Go ahead and by equal and do the same with the wet lubes. You will be amazed by militecs performance once you properly apply it. I'm going to subscribe hoping to see that vid!
How will i get this friction test machine?